Result in Bar
0
Equivalent pressure value
Accurate pressure conversion tool for Pa, bar, kPa, atm, and psi
Convert pascals to bar instantly with precise calculations. Includes bidirectional conversion and detailed pressure unit breakdowns for 2026.
Professional pressure conversion for engineering, science, and everyday use
Convert pascals to bar with full precision using the standard SI conversion factor. Our tool uses the exact ratio of 1 bar = 100,000 Pa to deliver accurate results for any pressure value — from small scientific measurements to high-pressure industrial applications.
Switch seamlessly between pascals to bar and bar to pascals conversion modes. Get instant results in multiple pressure units including kPa, MPa, atm, psi, and mmHg — all from a single input value.
Perfect for engineers, physicists, meteorologists, and students. Use this tool for tyre pressure checks, weather barometric readings, hydraulic system calculations, and any professional or academic scenario requiring reliable pressure unit conversions.
Select conversion direction and enter your pressure value below
The pascal (Pa) is the SI unit of pressure, defined as one newton per square metre (N/m²). It is named after the French mathematician and physicist Blaise Pascal. Because a single pascal represents a very small amount of pressure, larger units like kilopascal (kPa), megapascal (MPa), and bar are commonly used in engineering and industrial applications.
The bar is a metric unit of pressure defined as exactly 100,000 pascals (100 kPa). It is widely used in meteorology, hydraulics, and industrial processes. Although the bar is not an SI unit, it is accepted for use with the SI system and remains one of the most practical pressure units for everyday and professional applications. You can learn more about pressure units from the NIST Guide to SI Units.
Example: 250,000 Pa ÷ 100,000 = 2.5 bar | 3.5 bar × 100,000 = 350,000 Pa
1 bar equals exactly 100,000 pascals or 100 kilopascals — a simple relationship used in science and engineering worldwide.
Use this reference table to quickly look up common pascal to bar conversions. All values are calculated using the exact factor of 1 bar = 100,000 Pa.
| Pascals (Pa) | Bar | kPa | MPa | atm | PSI |
|---|---|---|---|---|---|
| 1 Pa | 0.00001 bar | 0.001 kPa | 0.000001 MPa | 0.00000987 atm | 0.000145 psi |
| 100 Pa | 0.001 bar | 0.1 kPa | 0.0001 MPa | 0.000987 atm | 0.01450 psi |
| 1,000 Pa | 0.01 bar | 1 kPa | 0.001 MPa | 0.00987 atm | 0.1450 psi |
| 10,000 Pa | 0.1 bar | 10 kPa | 0.01 MPa | 0.0987 atm | 1.450 psi |
| 50,000 Pa | 0.5 bar | 50 kPa | 0.05 MPa | 0.4935 atm | 7.252 psi |
| 100,000 Pa | 1 bar | 100 kPa | 0.1 MPa | 0.9869 atm | 14.504 psi |
| 250,000 Pa | 2.5 bar | 250 kPa | 0.25 MPa | 2.467 atm | 36.26 psi |
| 500,000 Pa | 5 bar | 500 kPa | 0.5 MPa | 4.935 atm | 72.52 psi |
| 1,000,000 Pa | 10 bar | 1,000 kPa | 1 MPa | 9.869 atm | 145.04 psi |
| 5,000,000 Pa | 50 bar | 5,000 kPa | 5 MPa | 49.35 atm | 725.2 psi |
| 10,000,000 Pa | 100 bar | 10,000 kPa | 10 MPa | 98.69 atm | 1,450 psi |
The pascal (Pa) is the SI derived unit of pressure. It equals one newton of force applied over one square metre of area (1 Pa = 1 N/m²). It was named after Blaise Pascal in 1971 and is used globally in science, engineering, and meteorology.
The bar is a metric unit of pressure equal to 100,000 pascals. It was introduced in 1909 and is widely used in industry, weather forecasting, and hydraulic systems. Standard atmospheric pressure is approximately 1.01325 bar at sea level.
Standard atmospheric pressure (1 atm) equals 101,325 Pa or approximately 1.01325 bar. This reference point is critical for weather science, aviation, and diving. A pressure of 1 bar is slightly less than one standard atmosphere.
Car tyre pressure is commonly measured in bar in most countries. A typical passenger car tyre runs at 2.0 to 2.5 bar (200,000–250,000 Pa). Truck tyres operate at much higher pressures, up to 8 bar or more for heavy loads.
In hydraulic and pneumatic systems, pressures are often expressed in bar. High-pressure industrial equipment may operate at 200–700 bar (20–70 MPa). Understanding the Pa to bar relationship is essential for system design and safety compliance.
Water pressure increases by approximately 1 bar (100,000 Pa) for every 10 metres of depth. At 100 metres underwater, the pressure is around 11 bar (10 from water + 1 from atmosphere), which is vital knowledge for diving and submarine engineering.
To convert pascals to bar, simply divide by 100,000 (or multiply by 0.00001). To go the other way — bar to pascals — multiply by 100,000. For kilopascals (kPa), divide by 100 to get bar. These simple rules make pressure conversion fast and reliable in any field.
Both bar and kPa are commonly used alternatives to the pascal for measuring pressure. 1 bar = 100 kPa. The bar is more widely used in industry and meteorology, while kPa is preferred in scientific and medical contexts. Both are accepted for use with the SI system and convert directly with a factor of 100.
The millibar (mbar) is 1/1000 of a bar, equal to 100 Pa. It is widely used in weather forecasting — standard atmospheric pressure is approximately 1013.25 mbar. When reading pressure gauges or weather reports, always check whether the unit is bar or millibar to avoid a 1,000× error in your calculations.
Converting pascals to bar is one of the simplest pressure unit conversions because the relationship is a clean factor of 100,000. Here is the exact process for manual calculation:
For converting bar to pascals, reverse the process — multiply the bar value by 100,000. For example, 2.75 bar × 100,000 = 275,000 Pa. This bidirectional conversion is fully supported in the calculator above, giving you instant results in both directions along with a full breakdown in kPa, MPa, atm, and PSI.
If you work with atmospheric pressure values, you may also find our Atmospheres to Pascals Converter useful for cross-referencing pressure readings across different unit systems.
Learn the full International System of Units (SI) framework for pressure measurement, including how the pascal relates to other derived units in science and engineering.
Visit NIST Guide →Explore our full library of free unit conversion tools covering time, area, energy, pressure, length, weight, and more — all optimised for fast, accurate results on any device.
Browse All Converters →Need to work with atmospheric pressure readings? Our Atmospheres to Pascals converter gives you instant atm to Pa results with a complete multi-unit breakdown including bar, kPa, and psi.
Convert atm to Pa →