Total Concrete Required
0.00 m³
Including wastage allowance for Sutherland Shire conditions
Accurate Concrete Estimates for Sutherland Shire, NSW Projects
Calculate exactly how much concrete you need for slabs, driveways, footings, columns and steps in Sutherland Shire. Get instant volume, bag counts and 2026 cost estimates — free, fast and no sign-up required.
Sutherland Shire's coastal clay soils, local council requirements and regional supplier pricing make accurate concrete planning essential for every project in the area.
Sutherland Shire sits on sandstone and coastal clay formations that can require higher-strength concrete mixes. Our calculator accounts for local conditions so you get the right volume without waste or underordering from suppliers like Boral or Hanson in the region.
Concrete prices in Sutherland Shire for 2026 range from $185 to $280 per m³ depending on grade and supplier. This calculator gives you a reliable cost range to plan your budget before requesting a formal quote from a local ready-mix supplier.
Whether you're pouring a patio slab in Cronulla, a footing in Miranda or a driveway in Engadine, this tool covers all common residential and commercial project types. Input your measurements and get an instant result in seconds.
Select your project type, enter dimensions, and get an instant concrete estimate for Sutherland Shire NSW.
Sutherland Shire is one of Sydney's most popular residential areas, stretching from Sutherland and Miranda in the north down to Cronulla, Engadine and the Royal National Park. With a mix of established homes undergoing renovation and new builds in areas like Menai and Gymea, concrete demand remains high across the LGA. Projects range from residential driveways and garden slabs to retaining walls and pool surrounds on steep terrain.
Choosing the right concrete grade is critical in Sutherland Shire due to its proximity to coastal saltwater environments. Areas like Cronulla, Bundeena and Kurnell are classified under AS 3600 as exposure categories B1 or B2, meaning higher-grade concrete (N32 or above) is often required for structural work exposed to the marine atmosphere. Always check with your local structural engineer or reference Standards Australia before specifying a mix for structural applications.
Suburbs within 1 km of the coast (Cronulla, Kurnell, Bundeena) require a minimum N32 concrete grade with a maximum water-cement ratio of 0.50 under AS 3600-2018 exposure category B2. Inland suburbs like Engadine and Heathcote are typically B1 or A2 rated.
A standard single-car driveway in Sutherland Shire (5m × 3m × 125mm) requires approximately 2.0–2.2 m³ of concrete. A rear entertainment slab (6m × 4m × 100mm) needs around 2.6–2.9 m³ including 10% wastage. Always over-order by at least 5–10%.
Many Sutherland Shire properties have narrow side access or steep rear gardens — especially in Engadine, Heathcote and hilly parts of Sutherland. Concrete pump hire typically adds $400–$750 to your project cost but is essential for inaccessible areas. Include this in your budget when planning.
Ready-mix concrete in Sutherland Shire costs approximately $185–$280/m³ in 2026 depending on grade, with minimum load charges typically applying for orders under 3 m³ (usually $150–$250 surcharge). Bagged concrete costs around $6.50–$9.50 per 20 kg bag from local suppliers.
Our calculator uses standard volumetric formulas adapted for Australian construction practice. For rectangular pours (slabs, driveways, footings), the net volume is calculated as:
Bag equivalents are calculated using industry-standard yields: a 20 kg premix bag yields approximately 0.0095 m³, and a 25 kg bag yields approximately 0.0120 m³. These figures are consistent with Boral, Hanson and Holcim product specifications commonly available across Sutherland Shire suppliers.
The table below shows estimated concrete costs for common project types in Sutherland Shire based on 2026 regional pricing. Figures include 10% wastage and assume standard access. Add pump hire if required.
| Project Type | Typical Size | Net Volume | +10% Waste | Grade | Est. Cost (2026) |
|---|---|---|---|---|---|
| Patio / Entertaining Slab | 6m × 4m × 100mm | 2.40 m³ | 2.64 m³ | N25 | $541 – $594 |
| Single Driveway | 5m × 3m × 125mm | 1.88 m³ | 2.06 m³ | N32 | $463 – $509 |
| Double Driveway | 5m × 5.5m × 125mm | 3.44 m³ | 3.78 m³ | N32 | $851 – $936 |
| Strip Footing (perimeter) | 20m × 0.4m × 0.3m | 2.40 m³ | 2.64 m³ | N25 | $541 – $660 |
| Round Post Footings (×6) | Ø300mm × 1.2m × 6 | 0.51 m³ | 0.56 m³ | N25 | $115 – $140 |
| Concrete Steps (4 steps) | 1.2m wide, 4 steps | 0.22 m³ | 0.24 m³ | N25 | $49 – $60 |
| Pool Surround | 8m × 2m × 100mm | 1.60 m³ | 1.76 m³ | N32 | $396 – $440 |
| Garage Slab | 6m × 6m × 100mm | 3.60 m³ | 3.96 m³ | N25 | $812 – $891 |
Sutherland Shire Council may require a DA (Development Application) or Complying Development Certificate (CDC) before pouring concrete for driveways, large slabs or retaining walls over 600mm. Always check with Sutherland Shire Council before starting your project to avoid costly rectification works.
Using the correct concrete grade is one of the most important decisions for any project. In the Sutherland Shire region, the following guidelines apply based on AS 3600-2018 and local contractor experience:
For projects in Sutherland Shire's steep terrain (common in Engadine, Heathcote and parts of Menai), also consider adding a fibremesh additive to your mix for crack control, especially in areas subject to ground movement during dry periods. You can read more about mix design on the Concrete Institute of Australia website.
Always order 5–10% more concrete than your calculated net volume. Running short mid-pour in Sutherland Shire means waiting for a second truck, which can cause cold joints and weaken your slab. Use our aggregate quantity calculator to also estimate your sub-base material needs before pouring.
If your project is within 1 km of the ocean in suburbs like Cronulla, Kurnell or Bundeena, use a minimum N32 concrete mix with supplementary cementitious material (fly ash or slag) for improved chloride resistance. Standard N25 mix in marine exposure zones will experience accelerated carbonation and reinforcement corrosion.
Check DA requirements, CDC eligibility, approved driveway specifications and construction certificates for your Sutherland Shire project before you pour.
Visit Council Website →Access technical guidance on concrete mix design, exposure categories, curing specifications and AS 3600-2018 compliance for residential and commercial projects.
Visit CIA Website →Always call 1100 or submit an enquiry online before any excavation in Sutherland Shire to identify underground utilities, pipes and cables near your site.
Submit Enquiry →Check Sutherland Shire weather forecasts before scheduling your concrete pour. BOM provides accurate 7-day forecasts for temperature, rain and wind for the region.
Check BOM Forecast →